Leave Your Message
Custom Ferrite Rod Core Coil Inductor – High Q, Low DCR, Screened & Unscreened Types for AM Antennas, Wireless Charging & EMI Suppression
Antenna Coil
Products Categories
Featured Products

Custom Ferrite Rod Core Coil Inductor – High Q, Low DCR, Screened & Unscreened Types for AM Antennas, Wireless Charging & EMI Suppression

NiZn/MnZn ferrite rod coils. Inductance: 1µH–50mH. ±3% precision available. High frequency stability. Customizable length, lead type & winding.

  • Product Name Ferrite Rod Antenna Coil
  • Core Material Mn-Zn Ferrite (High Permeability)
  • Wire Material Enameled Copper Wire (e.g., UEW/PEW)
  • Frequency Range AM / Medium Wave (530 kHz – 1620 kHz)
  • Inductance Range Customizable / Typically 180 µH – 600 µH (depending on turns)
  • Operating Temperature -20°C to +85°C
  • Mounting Type Through-Hole (Leaded)
  • RoHS Compliant Yes

🧲 Small Component. Big Signal Difference.

In RF communication and power electronics, the inductor is the heartbeat of your circuit. A poorly designed ferrite rod coil introduces noise, heat, and signal drift. Our rod core inductors are precision‑wound and 100% tested to give you clean, stable performance from prototype to production.

🔬 What Makes Our Coils Different

  • Core choice: NiZn (high frequency, 1–100MHz) or MnZn (power, <1MHz)

  • Winding technology: Computer-controlled layering – consistent spacing, no insulation damage

  • Terminal options: Tin-coated copper wire, SMD pins, or insulated leads

  • Shielding: Bare core for maximum sensitivity or screened sleeve for EMI reduction

⚡ Electrical Characteristics You Can Trust

Parameter Value Range
Inductance 1µH – 50mH
Tolerance ±5% (standard), ±3% (on request)
Q factor Up to 150 at specified frequency
DCR As low as 0.15Ω
SRF >10× operating frequency

🏭 Common Applications We Support

  • AM / LW / SW radio built‑in antennas

  • Battery‑free RFID tags and readers

  • Metal detectors and proximity switches

  • Wireless power receivers (Qi compatible on request)

  • Conducted EMI filters for power lines

🛠️ Customization – Your Coil, Your Rules

We don't force you into a catalog. Tell us:

  • Rod length (4mm – 150mm)

  • Rod diameter (2mm – 18mm)

  • Number of winding layers (1 to 4)

  • Center tap or multiple taps

  • Encapsulation (epoxy dip or heat shrink)

  • Lead stripping length and tinning

✅ Why Regular Buyers Stay With Us

  • Free electrical simulation before sampling

  • 5–7 day prototype lead time

  • Full L, Q, DCR, SRF test report with each batch

  • 100% RoHS, REACH, and Conflict Mineral compliant

  • Anti-static packaging with reel or bulk options

📞 Don't guess your inductor performance.

Send us: inductance value + core size + working frequency
We'll reply with a datasheet, free sample policy, and volume pricing within one business day.