China Suppliers Factory for Passive Components Inductor Wireless Charger Qi Charging Coil
Can do 5W, 10W, 15W coil, shape can be customized, wireless charging, unlimited freedom, 360 degrees free charging, does not harm the battery, speed up 45% — from now on farewell to the cable.
Wireless charger products are mainly used in various wireless chargers, car charging, mobile phone fast charging, beauty instrument charging, electric toothbrush, electric vehicle, portable electronic products, household appliances, micro power applications, robots/drones, underwater applications, special applications, etc.
Wireless Charger Coil & Manufacturing Process
Wireless charging coils mainly use the principle of electromagnetic induction to couple energy through the coil and achieve energy transfer. During system operation, the input terminal converts AC mains power into DC power through a full bridge rectifier circuit, or directly supplies power to the system using a 24V DC terminal. After passing through the power management module, the output DC power is converted into high-frequency AC power by a 2M active crystal oscillator inverter and supplied to the primary winding. By coupling energy through two inductive coils, the current output from the secondary coil is converted into direct current through a conversion circuit to charge the battery.
The wireless charging coil is the core component for implementing wireless charging technology, which achieves non-contact transmission of electrical energy through electromagnetic induction or magnetic resonance principles. A basic wireless charging system consists of a transmitting coil (Tx) and a receiving coil (Rx): the transmitting coil converts electrical energy into an alternating magnetic field, while the receiving coil converts this magnetic field change back into electrical energy to power the device.
Working Principle
The working principle of wireless charging coils is based on electromagnetic induction. When alternating current passes through a transmitting coil, a changing magnetic field is generated. If the receiving coil is within this magnetic field range, the change in magnetic field will induce electromotive force (voltage) in the coil, thereby generating current. In order to improve transmission efficiency and distance, the system usually operates at a specific resonant frequency and compensates for the resonant state of the coil through capacitors.
Its essence is a loosely coupled transformer, consisting of a transmitting coil located inside the charging pad and a receiving coil inside devices such as mobile phones. The core principle is Faraday's discovery of electromagnetic induction. The entire charging process can be roughly divided into four steps:
- 1Electromagnetics: The circuit inside the charging board converts household AC power into high-frequency AC power, which is then fed into the transmitting coil. A magnetic field with the same high-frequency variation will be generated around the coil.
- 2Magnetoelectricity: When a mobile phone or other device is placed on a charging pad, the receiving coil inside the device will "cut" these changing magnetic field lines. According to the law of electromagnetic induction, current will be induced inside the coil.
- 3Energy Conversion: The receiving coil generates high-frequency AC power, which needs to be rectified and filtered by the internal circuit of the device, and finally converted into stable DC power to charge the battery.
- 4Communication and Control: In order to ensure safe and efficient charging, the transmitting and receiving ends will have a "conversation" through Bluetooth or signals loaded on a magnetic field, telling the transmitting end "how much electricity I need and can start charging", and performing functions such as Foreign Object Detection (FOD) to prevent metal foreign objects from being mistakenly heated.
Structural Composition
A wireless charging coil module, not just copper wire, usually consists of these parts working together:
- ●Coil: This is the core. At the transmitting end, low-cost and low loss multi stranded wires or wrapped wires are commonly used for winding; In thin mobile phones and other receivers, flexible FPC (flexible circuit board) coils or ultra-thin multi strand coils are often used to save internal space.
- ●Magnetic Shield: It is attached to the back of the coil and plays a crucial role in guiding magnetic field lines and enhancing coil inductance; The second is to prevent magnetic fields from leaking onto the battery or metal back cover, generating eddy currents that can cause the device to heat up and serve as magnetic shielding.
- ●Resonant Capacitor: It is connected in series or parallel with a coil to form a resonant circuit. It can compensate for the inductance of the coil, achieving the highest efficiency of electrical energy transmission, just like adjusting the frequency of a radio.
The application fields of wireless charging coils are very extensive, from the smartphones and smartwatches we come into contact with in our daily lives, to higher power electric tools, sweeping robots, drones, and even the future wireless charging of electric vehicles, all of which rely on this key "heart".
At present, wireless charging technology is developing towards high power (such as laptops, electric vehicles), long-distance (such as wireless charging environments with full house coverage), and high degree of freedom (dynamic charging, i.e. charging while walking). And all of this cannot be achieved without continuous optimization of coil materials and system design.














