China Suppliers Radio Medium Wave AM Antenna Coil with Ionospheric Reflection Propagation - Factory Direct Product
🎯 Application
- Access Control
- ISO Card
- Non-contact Smart Card
- Door Number
- Electronic Pen
- RF Transceiver Module
- Trackable Device
- Agriculture
- GPS
⚙️ Features
✅
For the testing of more than 10 wires such as pinholes, uniformity, and meter resistance, the standards are far higher than the industry average level.
📖 More Detailed Information
Antenna Coil & Antenna Coil Manufacturing Process
The antenna coil structure consists of two sets of unconnected coils wound around a magnetic rod, forming the antenna coil used in the input circuit of a radio. Two independent coils form a high-frequency transformer. Soft magnetic ferrite materials are mainly classified into manganese zinc ferrite, nickel zinc ferrite, high conductivity manganese zinc ferrite, etc.
The antenna magnetic rod coil is a high-frequency transformer composed of a magnetic rod and a coil. The coils wound on a magnetic rod are usually divided into two groups:
- Primary coil: Forms a tuning circuit with a variable capacitor, used to select the radio frequency you want to listen to.
- Secondary coil: By coupling, the selected signal is transmitted to the next stage circuit of the radio for amplification processing.
The working principle can be decomposed into two key steps:
- 1. Collection and aggregation (function of magnetic rod): The magnetic rod is made of a soft magnetic material called ferrite, which has a high magnetic permeability. It acts as a "funnel" to efficiently attract and gather scattered magnetic field lines from a wide area onto itself.
- 2. Induction and enhancement (the role of coils): With the magnetic field lines tightly confined within the magnetic rod and passing through the coils, much higher voltage signals can be induced than without the magnetic rod — greatly enhancing the antenna's sensitivity for weak signals.
Structure and Materials
- Medium wave magnetic rod: Usually black, made of manganese zinc ferrite, high magnetic permeability, suitable for lower frequencies (~1.6 MHz).
- Shortwave magnetic rod: Usually brown or gray, made of nickel zinc ferrite, low magnetic permeability, operates at higher frequencies (~30 MHz) with low high-frequency losses.
- Coil: Medium wave coils are wound with multiple strands of yarn to reduce skin effect losses. Short wave coils use silver-plated copper wire with gaps to reduce losses and distributed capacitance.
Application Fields
- Wireless communication: Miniaturization, high efficiency, anti-interference — applied to IoT sensors, underground/pipeline communication, near-field communication (NFC).
- Wireless charging: Improves transmission efficiency, reduces device size — applied to consumer electronics (mobile phones, watches), medical implant devices, industrial sensors.
- New antenna: Breaks through traditional size limitations, achieves ultra-low frequency communication — applied in ground penetrating communication, pipeline robot positioning, underwater communication.
🖼️ Product Details Image
Make a Free Consultant
❓ Frequently Asked Questions
What is an antenna coil and how does it work? ▶
An antenna coil consists of two sets of unconnected coils wound around a magnetic rod. It works by collecting and concentrating magnetic field lines through a ferrite rod, then inducing voltage signals in the coils via electromagnetic induction. This greatly enhances the receiving sensitivity of the antenna for weak signals.
What materials are used for the magnetic rod in antenna coils? ▶
The material depends on the operating frequency. Medium wave magnetic rods are typically black and made of manganese zinc ferrite (suitable for ~1.6 MHz), while shortwave magnetic rods are brown or gray and made of nickel zinc ferrite (suitable for up to ~30 MHz with low high-frequency losses).
What applications are antenna coils used for? ▶
Antenna coils are widely used in access control systems, ISO cards, non-contact smart cards, electronic pens, RF transceiver modules, trackable devices, agriculture monitoring, GPS systems, IoT sensors, NFC communication, wireless charging, and underground/pipeline communication.
What quality testing standards are applied to these antenna coils? ▶
Our antenna coils undergo testing of more than 10 wire parameters including pinholes, uniformity, and meter resistance. The testing standards are far higher than the industry average level, ensuring superior product reliability and performance consistency.
What is the difference between the primary coil and secondary coil in an antenna coil? ▶
The primary coil forms a tuning circuit with a variable capacitor to select the desired radio frequency. The secondary coil receives the selected signal through electromagnetic coupling and transmits it to the next stage circuit for amplification and processing.
Can antenna coils be used for wireless charging applications? ▶
Yes. Antenna coils are suitable for wireless charging applications. They improve transmission efficiency and help reduce device size. Common applications include consumer electronics such as mobile phones and smartwatches, medical implant devices, and industrial sensors.














